6" Untreated Razor Edge Polishing Wheel 36 Ply

Description: Razor or Knife Edge Buff.

Typical Application: Generally selected for finishing narrow channels or recessed areas, sharp bends, and other difficult-to-reach areas. Designed for use on a tapered spindle or mandrel.

About: Razor buffs are a specialty buff designed for finishing narrow recessed areas that are inaccessible to most full disc buffs. They are manufactured by sewing various diameters of cloth discs together with the smaller discs in the center, this produces a buff that is thicker in the center and tapers out to a very thin working face. Subsequently as the buff wears the narrow face will gradually increase in width and are the most effective as an exceptionally narrow buff in the first 1/2 to 2/3 of the total usable diameter. A very light raking is required initially but should be performed as little as possible thereafter to achieve the maximum life expectancy of such a narrow buff. Available in mill treated cloth for enhanced cut down performance as well as the softer untreated cloth for final finishing.

Sizes: Stocked in all available diameters from 2-1/2” thru 6” and all include leather center and a ¼” center hole.

Precautions: Wear appropriate safety clothing, respiratory, and eye protection during use. Do not exceed maximum specified RPM.

Note: Industrial grade. Guaranteed for quality and performance.